Document Actions
Novelties
Up one levelCoating Thickness Gauge LAYERCHECK 700 FN
including universal probe for measurements on steel (measuring range 0 - 2000 μm) and non-ferrous metals (measuring range 0 - 2000 μm)
Coating Thickness Gauge LAYERCHECK 700 F
including probe for measurements on steel (measuring range 0 - 3000 μm), with statistics, two-point calibration, readings in microns or mils at choice, backlight display and interface RS 232
Color and Gloss Unit SPEKTROMASTER 565-45
for simultaneous measurement of color (geometry 45/0, aperture 11 mm) and gloss (geometry 60°, aperture 5 x 10 mm) in accordance with DIN, ISO and ASTM.
Color and Gloss Unit SPEKTROMASTER 565-D
for simultaneous measurement of color (geometry d/8, aperture 11 mm) and gloss (geometry 60°, aperture 5 x 10 mm) in accordance with DIN, ISO and ASTM.
Cupping and Deep-drawing Cup Test Machine, Model 242-Basic
for testing lacquers and paints of all kinds for elasticity and adhesive quality using the Erichsen Cupping Test in conformity with DIN EN ISO 1520, ISO 1520, BS 3900:Part E4, NF T 30-019 and SIS 18 41 77 and deep drawing cup test.
Cylindrical Mandrel Bending Tester, Model 266 S
To test adhesion and flexibility. Instrument with bending lever and 14 easily exchangeable cylindrical bending mandrels.
Film Applicator and Drying Time Recorder COATMASTER 510
Microprocessor controlled Film Applicator and Drying Time Recorder, with free adjustable drawing-down speed in the range of 0.1 - 19.9 / 20 - 100 mm/s as well as free adjustable dryness test time in the range of 0.1 - 19.9 / 20 - 108 min/cm, with integrated ejector (vaccum function to fix the substrates using by vacuum suction plates), including paint collection trough. Power supply: 100 - 240 V, 50/60 Hz via wide-range power supply unit
Lacquer and Paint Testing Machine, Model 202 EM
for testing lacquers and paints of all kinds for elasticity and adhesive quality using the Erichsen Cupping Test in conformity with DIN EN ISO 1520, BS 3900:Part E4, SIS 18 41 77 and NF T 30-019. The Testing Machine is precision finished as per Technical Description 202 EM,equipped with electromotive drive, a laterally opened test head, test tool acc. to DIN EN ISO 1520, electric installation for connecting the illumination of the special microscopes (Ord.-Nos. 0235.01.32 or 0237.01.32), cupping speed infinitely variable from 6 mm/min to 60 mm/min as well as a digital display for the acquisition of the ERICHSEN cupping value, with integrated preselection counter for setting the maximum cupping value required.
SAE Stone Hammer Blow Testing Instrument,
Electro-pneumatically controlled multi-blow test instrument
Scratch Hardness Tester LINEARTESTER 249
Scratching force in the range of (0.5 - 20) N, with electromotive drive, including circular level, power pack and operating manual.
Thickness Gauge PAINTXPLORER 548
Tabletop instrument for measuring the thickness of organic coatings on all base materials using the wedge cut principle, with microscope to be turned and moved sideways for measurements on ellipsoidal holes on lightly curved surfaces.
Universal Sheet Metal Testing Machine, Model 142-20-Basic
with electro-hydraulic drive, max. drawing force 200 kN and for pre-setting the blank holder pressure max. 40 kN, for testing sheets and strips of all types for the properties important for press working, stretch and deep drawing quality
Universal Sheet Metal Testing Machine, Model 142-40-Basic
with electro-hydraulic drive, max. drawing force 400 kN and for pre-setting the blank holder pressure of 220 kN, for testing sheets and strips of all types for the properties important for press working, stretch and deep drawing quality
Top