PHYSIMETER® 906 USB
PHYSIMETER® 906 USB equipped for external sensor connection
PHYSIMETER®

PHYSIMETER® 906 USB

Order number: 02910131
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

PHYSIMETER®

PHYSIMETER® 906 USB

The PHYSIMETER® 906 USB measuring device is used to record mechanical variables based on strain gauge sensors. Two different versions are available: The PHYSIMETER® 906 USB with a built-in force transducer and the PHYSIMETER® 906 USB configured to connect to an external sensor. There are three micro-batteries (type LR03) or alternatively the plug-in power supply. Data is transferred from the PHYSIMETER® to the PC using a USB interface (the USB cable is included). The measurement and evaluation software PHYSISOFT 906 USB is available as a free download at www.erichsen.de/service/downloads.

Technical specifications

Effective Direction

Tension/Compression

Measured Value 1

Force

Measuring Principle

DMS

Overload capacity

<10% of nominal force

Accuracy

0.2 % of the final value

Peak memory

max. and min. values

Sampling rate for peak value

approx. 1 kHz

Display rate for mean value

approx. 2 Hz

Interface

USB

Battery operation

alkaline battery type LR03; 3 pcs; 1400 mA approx. 8 h (sensor with measuring bridge of 1000 ohms) approx. 5 h (sensor with measuring bridge of 350 ohms)

Running amps

approx. 130 mA (sensor with measuring bridge of 1000 ohms) approx. 150 mA (sensor with measuring bridge 350 ohms)

External supply

plug-in power pack 115 V/230 V; 50/60 Hz, alternatively PC with USB cable

Reference temperature

(21 ± 2) °C

Operating temperature

+5 °C bis +35 °C

Display resolution

≥1000 pieces (from 10% of measuring range)

Digit height

10 mm

Dimensions (L x W x H)

150 x 69 x 33 mm (without load introduction pivot of the sensor)

Fixing bore in the housing

2 x M6 (distance 35 mm)

Load introduction

female thread M6

Weight

approx. 500 g

Equipment