DAkkS calibration possible (Mass of a set of weights (2 x 250 g, 2 x 750 g) according to OIML R 111-1:2004)

TABER Rotary Abraser para ensayos de resistencia a la abrasión, único equipo implantado en todo el mundo

Abrasión de TABER

TABER® ABRASER 352 S - Type 1700

Order number: 17000151

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

TABER® ABRASER 352 S - Type 1700
Technical Descriptions
Norms
Technical specifications
Note this product

Abrasión de TABER

El TABER® ABRASER 352 S (Plataforma), con su atractivo y moderno diseño, es una robusta unidad de mesa. Los elementos precisos de control y accionamiento se encuentran en una robusta carcasa de aluminio. La operación es fácil a través de la pantalla táctil LCD, con funciones como el estado del abrasador, referencia visual de la prueba completada, conmutación de ciclo/tiempo (completado o restante), intervalo de pausa programable, selección de idioma y mucho más. El TABER® ABRASER Modelo 352 S (Tipo 1700) tiene un porta-espécimen para realizar pruebas de abrasión.

Propósito y aplicación: La resistencia a la abrasión es una de las propiedades mecánicas más importantes de las superficies. Entre los métodos utilizados para probar la resistencia a la abrasión, el trabajo con el TABER® ABRASER es el más común y ampliamente utilizado. Numerosas normas nacionales e internacionales hacen referencia explícita a este instrumento de ensayo. El Original TABER® ABRASER puede utilizarse para realizar pruebas de abrasión en pinturas y otros revestimientos, como caucho, papel, cuero, cerámica, tejidos y metales. Este dispositivo se utiliza en la investigación y el desarrollo, así como en la producción y el control de calidad.

Principio de la prueba: La abrasión es causada por dos rodillos de fricción que actúan con una fuerza definida sobre el portamuestras giratorio al que está sujeto el espécimen. Una característica esencial de estas pruebas de abrasión es la cuadrícula en forma de X.

El comportamiento de la abrasión puede determinarse mediante los siguientes métodos de ensayo:

Método de pérdida de peso: El material que se va a probar se somete a un número definido de ciclos de revolución. La porción desgastada de la muestra se determina por medio de un pesaje diferencial.

Método de prueba final visual: La muestra se expone a la abrasión hasta que la superficie de la muestra se hace visible. El número de ciclos de rotación es la medida de la abrasión.

Determinación de la profundidad de abrasión: Después de un número determinado de ciclos, la profundidad de abrasión se mide con la ayuda de un micrómetro

Alcance de la entrega:

Taber ABRASER 352 S (Tipo 1700)
Pesas acoplables (1000 g de carga) - 2 piezas
Pesas acoplables (500 g de carga) - 2 piezas
Portamuestras (premontado) - 1 pieza
Anillo de acoplamiento para el portamuestras - 1 pieza
Destornillador Torx T25 para apretar el
Anillos de la tapa - 1 pieza
Cepillo para limpiar las muestras - 1 pieza
Aspiradora con cepillo de succión y manguera - 1 pieza
Cable de alimentación 115/230 VAC
Instrucciones de operación

This video cannot be shown due to your cookie privacy settings. To enable Youtube, click here.

Technical Descriptions

TBE-352_1700-1750.pdf TBE-352_1700-1750.pdf Dateigröße: 6.0 MB

Norms

EN 13329
NEMA LD 3-2000
EN 438-2
ISO 4586-2
NALFA LF-01

Technical specifications

Motor

Electric

Dimensions

approx. 320 mm x 400 mm x 220 mm (W x H x D)

Weight, net

approx. 20 kg

Power supply

230 V, 50 Hz

Equipment

TABER® Grit Feeder 355 (980355)
Order number: 17003052

For dry abrasion with aluminium oxyde granulates and leather wheels, complete with one pair of leather wheels S-39, standardization wheels S-38, 50 pound contai...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Quiet Cabinet, complete set
Order number: 03524652

For the reduction of sound levels and to provide a convenient, dustfree work space for the TABER® Abraser. Power supply 230 V, 50 Hz. The typical sound level ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Quiet Cabinet Top (large construction) for expansion
Order number: 03526452

for Quiet Cabinet Ord.-No. 0352.46.52, suitable for additional use of TABER® Grit Feeder, Model 355 (also to use for models 155/255).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Quiet Cabinet, complete set (with large top)
Order number: 03526552

For the reduction of sound levels and to provide a convenient, dustfree work space for the TABER® Abraser, with large top suitable for additional use of TABER...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Wheel Refacer, Model 350
Order number: 17000152

For refacing hard bond Calibrade abrasion wheels H-10, H-18, H-22, H-38 and and for out-of-round recentring calibrase wheels, with single point diamond tool (12...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Single Point Diamond Tool (120947)
Order number: 17000252

for Model 350.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Multiple Point Diamond Tool (125608)
Order number: 17000352

for Model 350.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Rotary Abraser Calibration Verification Kit
Order number: 03525652

For checking/verification of the abrasive trace of the TABER ABRASER. Instrument verification can be performed using the Calibration Verification Kit. This cost...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-8, per pair
Order number: 03526852

Purple, resilient, extra fine abrasion. A resilient wheel that offers a extremely mild abrading action, and was designed to operate under loads of 250 or 500 gr...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-10, per pair
Order number: 03520753

Green, resilient, medium abrasion. This resilient wheel offers a mild – medium abrading action like that of normal handling, cleaning, and polishing. This whe...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-10F, per pair
Order number: 03521752

Brown, resilient, fine abrasion. A resilient wheel that offers a mild abrading action, and was designed to operate under loads of 250 or 500 grams. When used to...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-10W, per pair
Order number: 03526052

White, resilient, medium abrasion. This wheel is the same as the CS-10 but white, to eliminate any color transfer from the wheel to the specimen.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE wheels CS-10P
Order number: 17000452

green, resilient, medium abrasion, per pair. Offers same abrasion rate as CS-10, but engineered so the wheel surface does not load with wear debris when testin...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-T3, per pair
Order number: 03526652

Red, resilient, fine abrasion (corresponds to old version of wheels CS-10F, type III)

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-17, per pair
Order number: 03521852

Green, resilient, coarse abrasion. The CS-17 typically produces a harsher abrasion compared to the CS-10 wheel. Normally operated using loads of 500 or 1000 gra...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Abrasive discs S-11, per 100 pcs
Order number: 03520553

For refacing of CALIBRASE-Reibrollen

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Testing disc ST-11 „Refacing Stone - Fine“
Order number: 03526752

Face and back applicable, for testing natural and synthetic rubber and/or surface grinding of Calibrase wheels

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-10, per pair
Order number: 03522052

Grey, vitrified, sintered, fine grain, fine abrasion. A non-resilient, vitrified wheel designed to evaluate steel and ferrous alloys for resistance to abrasion....

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-18, per pair
Order number: 03520853

Grey, vitrified, sintered,medium grain, medium abrasion. Provides a medium coarse abrasive action. It is most often used to evaluate resilient materials such as...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-22, per pair
Order number: 03522152

Grey, vitrified, sintered, coarse grain, coarse abrasion. The H-22 wheel produces a coarse abrasion. It has been used to test rubber, linoleum, leather, deep pi...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-38, per pair
Order number: 03522252

Tan, vitrified, sintered, fine grain, very fine abrasion. A non-resilient, vitrified abrading wheel comprised of fine abrasive particles. Designed to operate wi...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Rubber-wheels S-32, per pair
Order number: 03521452

For sandpaper strips S-33 and S-42 (= CS-0 wheel).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Felt wheels CS-5
Order number: 03521552

resilient, white, no abrasive, per pair

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Felt strips
Order number: 650000341

self-adhesive, for tests acc. to DIN 68 861, Part 3 (behaviour when wiping furniture surfaces) for application on abrasion wheel CS-0, per 50 pcs.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Tungsten CARBIDE wheels S-35, per pair
Order number: 03521152

Manufactured out of tungsten carbide, the periphery of the S-35 consists of sharp helical teeth (1 mm pitch x 45° spiral pitch angle). The teeth combine both a...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Aluminium Wheel Set S-24, per pair
Order number: 17000552

Manufactured from 6061 aluminum. This wheel set has been used to evaluate the abrasive action of a material by measuring the mass loss of the wheel.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Rubber pads S-19
Order number: 03522352

for specimen holder, O.D. 10,8 cm (5 pcs./pkg.)

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting cards S-36
Order number: 03521252

Coated on one side with a pressure sensitive adhesive to hold textiles and other flexible test specimens tightly to the mounting surface, preventing wrinkles un...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting cards S-36-1
Order number: 03524952

Coated on one side with a pressure sensitive adhesive to hold textiles and other flexible test specimens tightly to the mounting surface, preventing wrinkles un...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting sheets S-37
Order number: 03521352

(100 pcs./pkg.) Coated on both sides with a pressure sensitive adhesive to provide a non-slip attachment for materials specimens such as ceramics, plastics and ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting sheets S-37
Order number: 03524752

Coated on both sides with a pressure sensitive adhesive to provide a non-slip attachment for materials specimens such as ceramics, plastics and glass when no ce...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen plates S-16, material: steel
Order number: 03520453

(10 pcs./pkg.) Uniformly blanked from #20 guage sheet steel and dull finished for good adhesion of the coating to the metal. The size is 100 mm square with rou...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen Plates (birch plywood) S-17
Order number: 17000652

(per 10 pcs.) Produced from grade A1, 6.35 mm thick birch plywood. Sanded on both sides, the size is 100 mm1 square with a 6.35 mm center hole.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen plates of Aluminium S-18
Order number: 17000752

(per 10 pcs.) Manufactured from #18 gauge 5052 aluminum. The size is 100 mm square with rounded corners and a 6.5 mm center hole.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

NEMA glass standardization plates S-31
Order number: 03520552

per 10 pcs. Quality plate glass, approximately 100 mm1 square by 3.2 mm thick with a 6.5 mm center hole.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Standardization plates S-34, material: zinc, per 5 pcs
Order number: 03520852

For control of sandpaper strips S-33 and S-42

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Extension nut S-21
Order number: 03522452

For rigid specimens (6.3 to 12.7 mm thick) (¼' to ½') (requires a 9.52 mm (3/8')hole in the specimen).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Clamp plate S-23
Order number: 17000952

When testing carpeting and other compressible materials, a smaller diameter clamp plate is available to prevent crushing of the specimen fibers near the wear pa...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder 'Standard' SH-125
Order number: 17001052

Complete with rubber pad, nut an clamp plate. The SH-125 specimen holder is supplied with the Taber Abraser and will accommodate most rigid or flexible materia...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen hold-down ring 'A' SH-101
Order number: 17001152

For flexible materials up to 0.79 mm thick, incl. TORX T25 screwdriver. The standard hold-down ring is Model SH-101, also referred to as hold-down ring “A”...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen hold-down ring 'B' SH-102
Order number: 17001252

For flexible materials up to 1.59 mm thick, incl. TORX T254 screwdriver. Model SH-102 or hold-down ring “B” is a similar design but has a 110 mm I.D. to ac...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder (tall) SH-12
Order number: 17001352

Complete with rubber pad, nut and clamp plate. Model SH-12 Tall specimen holder is similar to SH-125 specimen holder, but provides a 15 mm thick holder versus ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder 'Textile' SH-15
Order number: 17001452

Complete with rubber pad, nut and clamp plate. The SH-15 Textile specimen holder includes a raised wear track which has a rubber pad adhered to the surface. Th...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder 'Drive Pin' SH-19
Order number: 17001552

incl. TORX T25 L-key. The SH-19 Drive Pin specimen holder is intended for rigid, square specimens that do not have a center-mounting hole. One corner of the sp...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen 'Sliding Mount' SH-26
Order number: 17001652

incl. TORX T25 L-key. With four adjustable mounts, the SH-26 Sliding Mount specimen holder is designed to test four 50 mm square, rigid specimens. Modified cla...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder SH-75 - rimmed
Order number: 17001752

The SH-75 Rimmed specimen holder is used for wet testing materials to determine the effect of absorbed and / or surface moisture on abrasion resistance. A 7.6 m...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Arm Height Extension Kit (1700-04)
Order number: 17001852

For test specimens up to 40 mm (includes height extension plate; stud extender; rubber pad; nut and clamp plate; set of 6 shims; T30 Torx & Hex L-Keys). The Mo...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Wheel tracking cards S-45/2 (132150-2)
Order number: 17002352

For use with Arm Height Extension Kit (1700-04) (15 pcs.).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight Set 50 g 'Arm Kit' (135369)
Order number: 17001952

To archieve 125 g load (2 pcs.). The Counterweight Arm Kit reduces the total load applied to the specimen. The counterweight arms mount to the Model 1700/1750 ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight-Set 125 g (135937)
Order number: 17002052

For Counterweight Set 'Arm Kit' (Ord.-No. 17001952).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight-Set 150 g (135927)
Order number: 17002152

For Counterweight Set 'Arm Kit' (Ord.-No. 17001952)

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight-Set 175 g (135928)
Order number: 17002252

For Counterweight Set 'Arm Kit' (Ord.-No. 17001952).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Brush S-12
Order number: 03520653

For cleaning specimen plates.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Vacuum unit 5131-70 (230 V), with clean up brush and suctionhose
Order number: 03521253

Type and Serial No. of the concerned TABER Abraser has to be mentioned in the Purchase Order!

Vacuum unit 5130-70 (115 V), with clean up brush and suctionhose
Order number: 03521953

Type and Serial No. of the concerned TABER Abraser has to be mentioned in the Purchase Order!

Collecting filter bag, per 3 pcs
Order number: 03521453

Vacuum unit's type and and model no. has to be mentioned in the Purchase Order!

Filter cartridge (131680)
Order number: 03522153

Vacuum unit's type and and model no. has to be mentioned in the Purchase Order!

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sample cutter '5000'
Order number: 03524852

O.D. 4.2' (107 mm) with a centrical hole with an outer diameter of ¼' (6 mm). The Model 5000 Sample Cutter is a bench top instrument designed to cut a 108 mm ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

'Scuffing Head' Attachment SH-300 (135647)
Order number: 17002452

incl. two load auxiliary weights (1 lb and 2 lb), TORX T10 L-key; without scuffing heads The Model SH-300 Scuffing Head Attachment is used to evaluate damage c...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Scuffing Head, type 'A' (135636)
Order number: 17002552

(similar to the flat blade of a screwdriver/blade is approx. 8 mm wide); for Ford Motor Company Physical Test Method FLTM BN 108-04 'Resistance to scuffing' or ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Scuffing Head, type 'B' (135637)
Order number: 17002652

(with knife edge/blade is approx. 4 mm wide); for Ford Motor Company Physical Test Method FLTM BN 108-04 'Resistance to scuffing', to use with 'Scuff'-Attachmen...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Scuffing Head, type 'C' (135638)
Order number: 17002752

(blade with rounded contact area and radius edge approx, 8 mm; for General Motors GM9911P; to use with 'Scuff'-Attachment SH-300.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Auxiliary weight (453 g /1 lb) for 'Scuff'-Attachment SH-300
Order number: 17002852

For 'Scuff'-Attachment SH-300.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Auxiliary weight (907 g /2 lb) for 'Scuff'-Attachment SH-300
Order number: 17002952

For 'Scuff'-Attachment SH-300.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-33, per 100 pcs
Order number: 03524452

self-adhesive, acc. to EN 438-2, ISO 4586-2, DIN 53 799 NEMA LD 3, for abrasion wheels S-32. A 12.7 mm x 165 mm strip of 360 FEPA closed coat sandpaper that inc...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-33, per 500 pcs
Order number: 03526252

self-adhesive, acc. to EN 438-2, ISO 4586-2, DIN 53 799 NEMA LD 3, for abrasion wheels S-32. A 12.7 mm x 165 mm strip of 360 FEPA closed coat sandpaper that inc...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-42, per 100 pcs
Order number: 03524352

self-adhesive, for abrasion wheels S-32. A 12.7 mm x 165 mm strip of 180 ANSI-CAMI open coat sandpaper that includes a pressure sensitive adhesive to affix the ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-42, per 500 pcs
Order number: 03525552

self-adhesive, for abrasion wheels S-32. A 12.7 mm x 165 mm strip of 180 ANSI-CAMI open coat sandpaper that includes a pressure sensitive adhesive to affix the ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Leather wheels S-39, per pair
Order number: 03521753

For TABER® Grit Feeder, Models 155 & 255. This wheel includes a leather strip that has been adhered to exterior of a brass hub and is used in conjunction with ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Aluminium-Oxyd-Grit S-41, 50 pound container (1 pound = 453,6 g)
Order number: 03521853

For TABER® Grit Feeder, Models 155 & 255

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Vacuum cleaner ELSEA (115 V, 60 Hz)
Order number: 17003252

For TABER ABRASER 352 S (type 1700) and TABER ABRASER 352 D (type 1750); incl. flexible suction hose and round brush

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Vacuum cleaner ELSEA (230 V, 50 Hz)
Order number: 17003152

For TABER ABRASER 352 S (type 1700) and TABER ABRASER 352 D (type 1750); incl. flexible suction hose and round brush

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Paper Filter Bag ELSEA (FI003C/10)
Order number: 17003352

20 lt. per pc.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Polyester Filter Bag ELSEA (FI003P/5)
Order number: 17003452

20 lt, per pc.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Net:	0.00	€
VAT.:	0.00	€
Discount Net:	0.00	€
Discount VAT.:	0.00	€
Discount Total:	Total	€
Shipping:	0.00	€
Total:	Total	€