'Scuffing Head' Attachment SH-300 (135647)
incl. two load auxiliary weights (1 lb and 2 lb), TORX T10 L-key; without scuffing heads The Model SH-300 Scuffing Head Attachment is used to evaluate damage caused by the scraping action by one of three special scuffing heads held at a 110° angle relative to the specimen surface. Model SH-300 includes the scuffing head attachment with 1 lb. and 2 lb. auxiliary weights. Three scuffing head configurations are sold separately. Referenced in SAE J365, scuffing head type “A” is similar to the flat blade of a screwdriver, and is approximately 8 mm wide. Type “B” has a knife edge that is approximately 4 mm wide. Type “C” has a radius edge that is approximately 8 mm wide. Used in place of the abrasive wheels, the Scuffing Head Attachment is mounted on the left abraser arm wheel collet and includes a stop to prevent rotation of the scuffing head. The abraser is operated in the normal fashion, however the vacuum system is not utilized. This kit is typically used on materials such as vinyl, leather, textiles, non-woven materials, plastics and painted products.
Ensaio de superfícies

'Scuffing Head' Attachment SH-300 (135647)

Order number: 17002452
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Ensaio de superfícies

'Scuffing Head' Attachment SH-300 (135647)

incl. two load auxiliary weights (1 lb and 2 lb), TORX T10 L-key; without scuffing heads

The Model SH-300 Scuffing Head Attachment is used to evaluate damage caused by the scraping action by one of three special scuffing heads held at a 110° angle relative to the specimen surface. Model SH-300 includes the scuffing head attachment with 1 lb. and 2 lb. auxiliary weights. Three scuffing head configurations are sold separately. Referenced in SAE J365, scuffing head type “A” is similar to the flat blade of a screwdriver, and is approximately 8 mm wide. Type “B” has a knife edge that is approximately 4 mm wide. Type “C” has a radius edge that is approximately 8 mm wide.
Used in place of the abrasive wheels, the Scuffing Head Attachment is mounted on the left abraser arm wheel collet and includes a stop to prevent rotation of the scuffing head. The abraser is operated in the normal fashion, however the vacuum system is not utilized. This kit is typically used on materials such as vinyl, leather, textiles, non-woven materials, plastics and painted products.

Equipment