Универсальный станок для испытания листового металла, испытание на вытяжку и глубокую вытяжку по Эриксену, усилие вытяжки до 120 кН
Универсальный-Испытание на глубокую вытяжку
Model 134
Order number: 01780331-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Универсальный-Испытание на глубокую вытяжку
Model 134
Этот станок для испытания листового металла позволяет быстро и точно провести основные и известные на сегодняшний день испытания на глубокую вытяжку на черных и цветных тонколистовых металлах, а также большое количество других технологических испытаний. С помощью этой модели проводят испытание на вытяжку по Эриксену и глубокую вытяжку колпачков по Эриксену на листах и полосах металла. Кроме того, с помощью соответствующих инструментов можно провести испытания по Ольсену, распространенные в США.
Technical Descriptions
Norms
- ISO 8490
- EN 14-58
- EN 14-67
- EN ISO 20482
- JIS Z-2247
- DIN EN 1669
- ISO 11 531
- JIS Z 2249
- GB/T 15825
Technical specifications
Drawing Force
120 kN
Drawing Speed
770 mm/min
Drive
electro-hydraulic
Test 1
Erichsen cupping
Test 2
Deep Draw Test
Blank holder force
max. 45 kN
Drawing punch stroke
approx. 60 mm
Blankholder stroke
approx. 35 mm
Blanking force
max. 200 kN
Sheet metal insert
max. width 110 mm
Mains supply
230/400 V AC // 50/60 Hz // 2.2 kW
Dimensions
approx. 900 mm / 1100 mm / 800 mm (W x H x D)
Weight, net
approx. 470 kg
Equipment
SmartView
Order number: 30640032
Data logger for recording the measurements such as drawing force, blank holder force and stroke; the connection is made by an Ethernet connection. The software ...
Order number: 30640032
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Analogue outputs
Order number: 17520632
for drawing force, sheet holder force, drawing punch stroke and synchronization signal for external analysis systems (e.g. ARAMIS® or AutoGrid®) - Control Fun...
Order number: 17520632
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Test Tool “illuminated ball punch” (set)
Order number: 31000132
Suitable for sheets and metallic foils up to a thickness of 0.2 mm; max. permissible strengths of sheets: 1000 MPa at 0.05 mm / 500 MPa at 0.1 mm / 250 MPa at 0...
Order number: 31000132
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Adapter for the test tool “illuminated ball punch”
Order number: 32720132
Required to attach the camera holder. Suitable for model 134.
Order number: 32720132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Test Tool Set No. 5
Order number: 00070132
for strip more than 13 mm wide and 0.1 - 0.75 mm thick, consisting of ball punch 3 mm Ø, drawing die and sheet holder ring
Order number: 00070132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Test Tool Set No. 11
Order number: 00010132
for strip 30 - 55 mm wide and 0.1 - 1.0 mm thick, consisting of ball punch 8 mm Ø, drawing die and sheet holder ring
Order number: 00010132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Test Tool Set No. 21
Order number: 00060132
for strip 55 - 90 mm wide and 0.2 – 2,0 mm thick, consisting of ball punch 15 mm Ø, drawing die and sheet holder ring
Order number: 00060132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Test Tool Set No. 40
Order number: 00670132
for strip more than 90 mm wide and 2.0 - 3.0 mm thick, consisting of drawing die with 40 mm dia. bore, sheet holder ring and ball punch 20 mm dia
Order number: 00670132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Deep Drawing Test Tool No. B 1
Order number: 05010132
for testing the deep drawing quality and ear forming tendency of sheet metal specimens, consisting of drawing punch 33 mm dia. and ejector.
Order number: 05010132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Drawing Die for Test Tool B1/C2
Order number: 01370132
for one specific sheet thickness (see Technical Leaflet) - Please specify when ordering!
Order number: 01370132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Blanking Die Ring
Order number: 01380132
for one specific blank diameter (in the range of 55 - 80 mm), for all sheet thicknesses (see Technical Leaflet) - Please specify when ordering!
Order number: 01380132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Blanking Punch
Order number: 01390132
for one particular blank diameter in the range of 55 - 80 mm and for one range of sheet thickness (see Technical Leaflet) - Please specify when ordering!
Order number: 01390132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Deep Drawing Cup Test Tool C1
Order number: 05020132
for testing the deep drawing quality and ear forming tendency in a redrawing operation from cups produced on test tool B1, consisting of drawing punch 26 mm dia...
Order number: 05020132
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Drawing Die for Test Tool C1
Order number: 01410132
for one specific sheet thickness (see Technical Leaflet) - Please specify when ordering!
Order number: 01410132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Square Drawing Tool 26 x 26
Order number: 05030132
consisting of drawing punch 26 x 26 mm (corner radius 6.5 mm) - other radius on request -, with ejector and guide plate.
Order number: 05030132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Drawing Dies for Square Drawing Tool 26 x 26
Order number: 01720132
for one specific sheet thickness (see Technical Leaflet) - Please specify when ordering!
Order number: 01720132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Blanking Punch for Square Drawing Tool 26 x 26
Order number: 04210132
for a blank diameter of 60 mm and for sheet thickness range 0.2 - 1.1 mm or 1.1 - 2.0 mm (please specify) - Please specify when ordering!
Order number: 04210132
-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product