DAkkS calibration possible (Mass of a set of weights (2 x 250 g, 2 x 750 g) according to OIML R 111-1:2004)

TABER Rotary Abraser Duo для испытания на истирание, две испытательные установки

Ссадина TABER

TABER® ABRASER 352 D - Type 1750

Order number: 17500151

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

TABER® ABRASER 352 D - Type 1750
Technical Descriptions
Norms
Technical specifications
Note this product

Ссадина TABER

TABER® ABRASER 352 D (Платформа) с привлекательным и современным дизайном представляет собой прочный настольный прибор. Точные элементы управления и привода расположены в прочном алюминиевом корпусе. Простое управление осуществляется с помощью сенсорного ЖК-дисплея с такими функциями, как статус абразива, визуальная справка о выполненном тесте, переключение между циклами/время (завершенный или оставшийся), программируемый интервал паузы, выбор языка и многое другое. Модель 352 D (тип 1750) TABER® ABRASER имеет два держателя для образцов для проведения испытаний на абразивный износ.

Назначение и применение: Устойчивость к абразивному износу является одним из важнейших механических свойств поверхностей. Среди методов, используемых для проверки абразивной стойкости, работа с TABER® ABRASER является наиболее распространенным и широко используемым методом. В многочисленных национальных и международных стандартах содержится прямая ссылка на этот прибор испытания. С помощью Original TABER® ABRASER можно проводить испытания на абразивный износ лакокрасочных и других покрытий, таких как резина, бумага, кожа, керамика, текстильные ткани и металлы. Этот прибор используется в научно-исследовательских и опытно-конструкторских работах, а также в производстве и контроле качества.

Принцип теста: Абразивный износ вызывается двумя фрикционными роликами, которые действуют с определенной силой на вращающийся держатель образца, к которому прикреплен образец. Существенной особенностью этих испытаний на абразивный износ является Х-образная решетка.

Характеристики абразивного износа могут быть определены следующими методами испытаний:

Метод потери веса: Испытываемый материал подвергается определенному числу циклов вращения. Сниженная часть образца определяется путем дифференцированного взвешивания.

Визуальный метод конечного теста: Образец подвергается абразивному износу до тех пор, пока его поверхность не станет видимой. Количество циклов вращения является мерой для абразивного износа.

Определение глубины ссадины: После определенного количества циклов измеряется глубина абразивного износа с помощью микрометра

Объем поставки:

Тaber ABRASER 352 D (тип 1750)
Присоединяемый вес (нагрузка 1000 г) - 4 шт.
Присоединяемый вес (нагрузка 500 г) - 4 шт.
Держатель образца (предварительно собранный) - 2 шт.
Соединительное кольцо для держателя образцов - 2 шт.
Отвертка Torx T25 для затяжки
Шляпные кольца - 1 шт.
Щетка для очистки образцов - 1 шт.
Пылесос с всасывающей щеткой и шлангом - 1 шт.
Кабель питания 115/230 В перем. тока
Инструкции по эксплуатации

This video cannot be shown due to your cookie privacy settings. To enable Youtube, click here.

Technical Descriptions

TBE-352_1700-1750.pdf TBE-352_1700-1750.pdf Dateigröße: 6.0 MB

Norms

EN 13329
NEMA LD 3-2000
EN 438-2
ISO 4586-2
NALFA LF-01

Technical specifications

Drive

Electric

Test Benches/ Test Trail

Dimensions

approx. 540 mm x 400 mm x 220 mm (W x H x D)

Weight, net

approx. 40 kg

Power supply

230 V, 50 Hz

Equipment

Quiet Cabinet, complete set
Order number: 03524652

For the reduction of sound levels and to provide a convenient, dustfree work space for the TABER® Abraser. Power supply 230 V, 50 Hz. The typical sound level ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Wheel Refacer, Model 350
Order number: 17000152

For refacing hard bond Calibrade abrasion wheels H-10, H-18, H-22, H-38 and and for out-of-round recentring calibrase wheels, with single point diamond tool (12...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Single Point Diamond Tool (120947)
Order number: 17000252

for Model 350.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Multiple Point Diamond Tool (125608)
Order number: 17000352

for Model 350.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

TABER® Grit Feeder 355 (980355)
Order number: 17003052

For dry abrasion with aluminium oxyde granulates and leather wheels, complete with one pair of leather wheels S-39, standardization wheels S-38, 50 pound contai...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Rotary Abraser Calibration Verification Kit
Order number: 03525652

For checking/verification of the abrasive trace of the TABER ABRASER

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Wheel tracking cards S-45 (per 15 pcs)
Order number: 03525752

Spare cards for Calibration Verification Kit 03525652

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-8, per pair
Order number: 03526852

Purple, resilient, extra fine abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-10F, per pair
Order number: 03521752

Brown, resilient, fine abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-10, per pair
Order number: 03520753

Green, resilient, medium abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-10W, per pair
Order number: 03526052

White, resilient, medium abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE wheels CS-10P
Order number: 17000452

green, resilient, medium abrasion, per pair. Offers same abrasion rate as CS-10, but engineered so the wheel surface does not load with wear debris when testin...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRASE-wheels CS-17, per pair
Order number: 03521852

Green, resilient, coarse abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-10, per pair
Order number: 03522052

Grey, vitrified, sintered, fine grain, fine abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-18, per pair
Order number: 03520853

Grey, vitrified, sintered,medium grain, medium abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-22, per pair
Order number: 03522152

Grey, vitrified, sintered, coarse grain, coarse abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

CALIBRADE-wheels H-38, per pair
Order number: 03522252

Tan, vitrified, sintered, fine grain, very fine abrasion

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-33, per 100 pcs
Order number: 03524452

self-adhesive, acc. to EN 438-2, ISO 4586-2, DIN 53 799 NEMA LD 3, for abrasion wheels S-32

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-33, per 500 pcs
Order number: 03526252

self-adhesive, acc. to EN 438-2, ISO 4586-2, DIN 53 799 NEMA LD 3, for abrasion wheels S-32

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-42, per 100 pcs
Order number: 03524352

self-adhesive, for abrasion wheels S-32

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sandpaper strips S-42, per 500 pcs
Order number: 03525552

self-adhesive, for abrasion wheels S-32

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Rubber-wheels S-32, per pair
Order number: 03521452

For sandpaper strips S-33 and S-42 (= CS-0 wheel)

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Felt wheels CS-5
Order number: 03521552

resilient, white, no abrasive, per pair

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Felt strips
Order number: 650000341

self-adhesive, for tests acc. to DIN 68 861, Part 3 (behaviour when wiping furniture surfaces) for application on abrasion wheel CS-0, per 50 pcs.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Tungsten CARBIDE wheels S-35, per pair
Order number: 03521152

Manufactured out of tungsten carbide, the periphery of the S-35 consists of sharp helical teeth (1 mm pitch x 45° spiral pitch angle). The teeth combine both a...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Leather wheels S-39, per pair
Order number: 03521753

For TABER® Grit Feeder, Models 155 & 255

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Aluminium Wheel Set S-24, per pair
Order number: 17000552

Manufactured from 6061 aluminum. This wheel set has been used to evaluate the abrasive action of a material by measuring the mass loss of the wheel.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Abrasive discs S-11, per 100 pcs
Order number: 03520553

For refacing of CALIBRASE-Reibrollen

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Testing disc ST-11 „Refacing Stone - Fine“
Order number: 03526752

Face and back applicable, for testing natural and synthetic rubber and/or surface grinding of Calibrase wheels

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting cards S-36
Order number: 03521252

Coated on one side with a pressure sensitive adhesive to hold textiles and other flexible test specimens tightly to the mounting surface, preventing wrinkles un...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting cards S-36-1
Order number: 03524952

Coated on one side with a pressure sensitive adhesive to hold textiles and other flexible test specimens tightly to the mounting surface, preventing wrinkles un...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting sheets S-37
Order number: 03521352

(100 pcs./pkg.) Coated on both sides with a pressure sensitive adhesive to provide a non-slip attachment for materials specimens such as ceramics, plastics and ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen mounting sheets S-37
Order number: 03524752

Coated on both sides with a pressure sensitive adhesive to provide a non-slip attachment for materials specimens such as ceramics, plastics and glass when no ce...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen plates S-16, material: steel
Order number: 03520453

(10 pcs./pkg.) Uniformly blanked from #20 guage sheet steel and dull finished for good adhesion of the coating to the metal. The size is 100 mm square with rou...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen Plates (birch plywood) S-17
Order number: 17000652

(per 10 pcs.) Produced from grade A1, 6.35 mm thick birch plywood. Sanded on both sides, the size is 100 mm1 square with a 6.35 mm center hole.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen plates of Aluminium S-18
Order number: 17000752

(per 10 pcs.) Manufactured from #18 gauge 5052 aluminum. The size is 100 mm square with rounded corners and a 6.5 mm center hole.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

NEMA glass standardization plates S-31
Order number: 03520552

per 10 pcs. Quality plate glass, approximately 100 mm1 square by 3.2 mm thick with a 6.5 mm center hole.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Standardization plates S-34, material: zinc, per 5 pcs
Order number: 03520852

For control of sandpaper strips S-33 and S-42

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Standardization plates S-38, 4 x 4', ¼'-hole, per 10 pcs
Order number: 03521653

For TABER® Grit Feeder, Models 155 & 255

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Rubber pads S-19
Order number: 03522352

for specimen holder, O.D. 10,8 cm (5 pcs./pkg.)

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Extension nut S-21
Order number: 03522452

For rigid specimens (6.3 to 12.7 mm thick) (¼' to ½') (requires a 9.52 mm (3/8')hole in the specimen).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder 'Standard' SH-125
Order number: 17001052

Complete with rubber pad, nut an clamp plate. The SH-125 specimen holder is supplied with the Taber Abraser and will accommodate most rigid or flexible materia...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen hold-down ring 'A' SH-101
Order number: 17001152

For flexible materials up to 0.79 mm thick, incl. TORX T25 screwdriver. The standard hold-down ring is Model SH-101, also referred to as hold-down ring “A”...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen hold-down ring 'B' SH-102
Order number: 17001252

For flexible materials up to 1.59 mm thick, incl. TORX T254 screwdriver. Model SH-102 or hold-down ring “B” is a similar design but has a 110 mm I.D. to ac...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder (tall) SH-12
Order number: 17001352

Complete with rubber pad, nut and clamp plate. Model SH-12 Tall specimen holder is similar to SH-125 specimen holder, but provides a 15 mm thick holder versus ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder 'Textile' SH-15
Order number: 17001452

Complete with rubber pad, nut and clamp plate. The SH-15 Textile specimen holder includes a raised wear track which has a rubber pad adhered to the surface. Th...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder 'Drive Pin' SH-19
Order number: 17001552

incl. TORX T25 L-key. The SH-19 Drive Pin specimen holder is intended for rigid, square specimens that do not have a center-mounting hole. One corner of the sp...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen 'Sliding Mount' SH-26
Order number: 17001652

incl. TORX T25 L-key. With four adjustable mounts, the SH-26 Sliding Mount specimen holder is designed to test four 50 mm square, rigid specimens. Modified cla...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Specimen holder SH-75 - rimmed
Order number: 17001752

The SH-75 Rimmed specimen holder is used for wet testing materials to determine the effect of absorbed and / or surface moisture on abrasion resistance. A 7.6 m...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Arm Height Extension Kit (1700-04)
Order number: 17001852

For test specimens up to 40 mm (includes height extension plate; stud extender; rubber pad; nut and clamp plate; set of 6 shims; T30 Torx & Hex L-Keys). The Mo...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Wheel tracking cards S-45/2 (132150-2)
Order number: 17002352

For use with Arm Height Extension Kit (1700-04) (15 pcs.).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight Set 50 g 'Arm Kit' (135369)
Order number: 17001952

To archieve 125 g load (2 pcs.). The Counterweight Arm Kit reduces the total load applied to the specimen. The counterweight arms mount to the Model 1700/1750 ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight-Set 125 g (135937)
Order number: 17002052

For Counterweight Set 'Arm Kit' (Ord.-No. 17001952).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight-Set 150 g (135927)
Order number: 17002152

For Counterweight Set 'Arm Kit' (Ord.-No. 17001952)

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Counterweight-Set 175 g (135928)
Order number: 17002252

For Counterweight Set 'Arm Kit' (Ord.-No. 17001952).

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Brush S-12
Order number: 03520653

For cleaning specimen plates.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Vacuum cleaner ELSEA (115 V, 60 Hz)
Order number: 17003252

For TABER ABRASER 352 S (type 1700) and TABER ABRASER 352 D (type 1750); incl. flexible suction hose and round brush

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Vacuum cleaner ELSEA (230 V, 50 Hz)
Order number: 17003152

For TABER ABRASER 352 S (type 1700) and TABER ABRASER 352 D (type 1750); incl. flexible suction hose and round brush

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Paper Filter Bag ELSEA (FI003C/10)
Order number: 17003352

20 lt. per pc.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Polyester Filter Bag ELSEA (FI003P/5)
Order number: 17003452

20 lt, per pc.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Filter cartridge (131680)
Order number: 03522153

Vacuum unit's type and and model no. has to be mentioned in the Purchase Order!

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Sample cutter '5000'
Order number: 03524852

O.D. 4.2' (107 mm) with a centrical hole with an outer diameter of ¼' (6 mm). The Model 5000 Sample Cutter is a bench top instrument designed to cut a 108 mm ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

'Scuffing Head' Attachment SH-300 (135647)
Order number: 17002452

incl. two load auxiliary weights (1 lb and 2 lb), TORX T10 L-key; without scuffing heads The Model SH-300 Scuffing Head Attachment is used to evaluate damage c...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Scuffing Head, type 'A' (135636)
Order number: 17002552

(similar to the flat blade of a screwdriver/blade is approx. 8 mm wide); for Ford Motor Company Physical Test Method FLTM BN 108-04 'Resistance to scuffing' or ...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Scuffing Head, type 'B' (135637)
Order number: 17002652

(with knife edge/blade is approx. 4 mm wide); for Ford Motor Company Physical Test Method FLTM BN 108-04 'Resistance to scuffing', to use with 'Scuff'-Attachmen...

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Scuffing Head, type 'C' (135638)
Order number: 17002752

(blade with rounded contact area and radius edge approx, 8 mm; for General Motors GM9911P; to use with 'Scuff'-Attachment SH-300.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Auxiliary weight (453 g /1 lb) for 'Scuff'-Attachment SH-300
Order number: 17002852

For 'Scuff'-Attachment SH-300.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Auxiliary weight (907 g /2 lb) for 'Scuff'-Attachment SH-300
Order number: 17002952

For 'Scuff'-Attachment SH-300.

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Aluminium-Oxyd-Grit S-41, 50 pound container (1 pound = 453,6 g)
Order number: 03521853

For TABER® Grit Feeder, Models 155 & 255

Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product

Net:	0.00	€
VAT.:	0.00	€
Discount Net:	0.00	€
Discount VAT.:	0.00	€
Discount Total:	Total	€
Shipping:	0.00	€
Total:	Total	€