金属板材试验机，艾氏杯突试验，拉力可达 80 kN
Sheet Metal Testing Machine
102-80
Order number: 00120231-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Sheet Metal Testing Machine
102-80
这种金属板材试验机特别适用于中等板材厚度范围（0.1 至 3.0 mm）的材料试验。由于其快速可靠的质量控制而受到受到板材生产和加工企业青睐。102 型可进行针对所有铁金属和非铁金属的艾式杯突试验。使用适当的试具时，也可以按照 Olsen 规范进行试验，这些规范主要在美国使用。
Technical Descriptions
Norms
- ISO 8490
- EN 14-58
- EN 14-67
- EN ISO 20482
- JIS Z-2247
Technical specifications
Drawing Force
80 kN
Drawing Speed
150 mm/min
Drive
electro-hydraulic
Test 1
Erichsen cupping
Equipment
ErMES - Data logger for recording the measurements
such as drawing force, blank holder force and stroke, the connection is made by an USB connection. The software included in the scope of supply runs under WIN V...
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 5
for strip more than 13 mm wide and 0.1 - 0.75 mm thick, consisting of ball punch 3 mm Ø, drawing die and sheet holder ring
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 11
for strip 30 - 55 mm wide and 0.1 - 1.0 mm thick, consisting of ball punch 8 mm Ø, drawing die and sheet holder ring
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 21
for strip 55 - 90 mm wide and 0.2 – 2,0 mm thick, consisting of ball punch 15 mm Ø, drawing die and sheet holder ring
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 27
for strip more than 90 mm wide and 0.1 - 2.0 mm thick, consisting of ball punch 20 mm Ø drawing die and sheet holder ring
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 40
for strip more than 90 mm wide and 2.0 - 3.0 mm thick, consisting of drawing die with 40 mm dia. bore, sheet holder ring and ball punch 20 mm dia
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Special Microscope with Holder and Annular Lamp
for optical observation of the test process, with magnification factor of 10 over an area of 17.5 mm, as attachment for the determination of elasticity, adhesio...
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Bore Expanding Test Tool D acc. to Siebel and Pomp (KW)
(Initial bore 12 mm); for strip 70 mm wide and 0.2 - 1.2 mm thick. The set consists of drawing punch with centring pin, sheet holder ring and drawing die.
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Bore Expanding Test Tool E acc. to Siebel and Pomp (KWI)
(Initial bore 7.5 mm); for strip 45 mm wide and 0.2 - 1.0 mm thick. The set consists of drawing punch with centring pin, sheet holder ring and drawing die.
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Boring Jig
for drilling the 12 and 7.5 mm dia. holes for the deep drawing bore expanding tests D and E acc. to Siebel and Pomp (KWI), suitable for widths of material 70 an...
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Exchangeable Drills, Drilling Bushes and Reamers
for initial hole 12 mm dia. (suitable for boring jig 00350131)
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Exchangeable Drills, Drilling Bushes and Reamers
for initial hole 7.5 mm dia. (suitable for boring jig 00350131)
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product