自动网格切割试验仪，汽车塑料划痕试验，汽车塑料书写效应，手动支撑力调整
Cross Hatch Cutting and Adhesion Testing
SCRATCH HARDNESS TESTER 430 P-I-Smart
Order number: 03240131-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Cross Hatch Cutting and Adhesion Testing
SCRATCH HARDNESS TESTER 430 P-I-Smart
电动式划痕硬度测试仪 Model 430 P 是一种通用机型，用于在上漆涂层和塑料表面施加所有形式的划刮或切削应力：在各种厚度的样板上可造成单条裂痕或平行划痕，再将样板旋转 90°角后还可造成网格划痕。划痕硬度测试仪 Model 430 P 是专为涂层网格切割试验（符合所有通用标准）和塑料表面试验（执行欧宝标准 Opel）而设计的。对于此类试验和其他试验，主机相应具有诸多的设定可能性，也有多种多样的试具可供选用。划痕硬度测试仪 430 P 在系列测试时明显减少了工作量。试验结果具有可重复性和说服力。
Norms
- GME 60280 GM / Opel
- GMW 14688 GM / Opel
- PV 3952 VW / Audi
- PV 3974 VW / Audi
- PV 3962 VW / Audi
- D45 1047 Renault
- MS210-05K Hyundai / Kia
- STD 4377 Volvo
- ISO 2409 Common
Technical specifications
Drive
Electric
Scratch profile
Van Laar, Bosch, ISO, Clemen, etc.
Testing Force
1-50 N
Equipment
Test tip for cross hatch cutting (30°)
additionally covered with an extremly hard layer (short shaft with flat clamping area)
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test tip acc. to van Laar (Ø 0.5 mm)
Hard metal, half-sperically shaped, Ø 0,5 mm radius, short shaft, without flat clamping area
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test tip acc. to Bosch (Ø 0.75 mm)
Hard metal, half-sperically shaped, Ø 0,75 mm radius, short shaft, without flat clamping area
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test tip acc. to ISO 1518-1 (Ø 1 mm)
Hard metal, half-sperically shaped, Ø 1,0 mm radius, short shaft, without flat clamping area
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test tip technically equivalent to ISO 1518-1 (Ø 1.0 mm)
additionally covered with an extremly hard layer (short shaft without flat clamping area). Note: This test tip version is not approved for tests in accordance w...
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test tip acc. to BMW (Ø 3.0 mm)
(short shaft without flat clamping area)
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test tip acc. to Clemen (R 1.0 mm)
Hard metal, 1,0 mm radius, sharp edged, short shaft with flat clamping area
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Testing device for writing effect acc. to Opel
with mounted test disc (steel) and assembly tool (allen keys SW 1.5 and SW 2.5)
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test disc according to DBL 9202
made of steel, hard-coated, laser-engraved with 12 marked and numbered test areas, with calibration certificate.
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Testing device for tests according to DBL 9202
Holder for longitudinal guiding of the test disc, incl. test disc acc. to DBL 9202 made of steel, hard-coated, laser-engraved with 12 marked and numbered test a...
Mehr lesen...
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Set of weights for low load range (6 pcs.)
Consisting of holder and 5 weights (1 N, 2 N, 3 N, 4 N, 5 N), incl. Manufacturer's Test Certificate.
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test disc made of stainless steel (Ø 16 mm, R 0,5 mm)
Test disc made of steel (Ø 16 mm, R 0,5 mm), 1 mm thickness, 0,5 mm edge radius
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product