漆试验机，艾氏杯突试验，在 400 N/mm2 条件下可达 1.5
Lacquer and Paint Testing Machine
Model 200
Order number: 00010131-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Lacquer and Paint Testing Machine
Model 200
Only for a short time (August 2020 to December 2020) - Lacquer and paint testing machine, model 200 at a limited offer!
200型漆器和涂料测试机是一个台式的设备，有一个铸铁机身和一个圆柱形的测试头。200型用于根据DIN ISO 1520、ISO 1520、BS 3900 : Part E4、NF T 30-019和SIS 18 41 77对涂层金属板进行抗拉强度400 N/mm²的测试，厚度不超过1.25mm，宽度70-90mm。将涂有油漆或其他涂层的金属板试样用球形冲头拉入模具，从而拉伸材料，直到涂层开裂或脱落。当涂层失效时，材料被冲头拉出的深度是衡量油漆或涂层材料质量的标准，并与伸长率和粘合性有关。这种简单的手动操作的试验机特别适用于小型企业的油漆、涂料、塑料涂料和搪瓷的质量控制。
交付范围:
- 漆和油漆测试机，200型
- 测试工具符合DIN EN ISO 1520标准，精密设计。
Technical Descriptions
Norms
- DIN EN ISO 1520
- DIN EN 13523-6
Technical specifications
Drawing Force
30 kN
Drawing Speed
Manuel
Drive
Manuel
Test 1
Erichsen cupping
Portable / Stationary
Stationary
Equipment
Microscope with Magnification Factor 10 and Battery Operated Illumination
for accurate observation of the appearance of the crack
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 11
for strip 30 - 55 mm wide and 0.1 - 1.0 mm thick, consisting of ball punch 8 mm Ø, drawing die and sheet holder ring
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 27
for strip more than 90 mm wide and 0.1 - 2.0 mm thick, consisting of ball punch 20 mm Ø drawing die and sheet holder ring
-
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product