Model 111
金属板材试验机，艾氏杯突试验，拉力可达 45 kN
Sheet Metal Testing Machine

Model 111

Order number: 02300231
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product

Sheet Metal Testing Machine

Model 111

这种金属板材试验机专门设计用于快速简便地进行板材与带材的进货检查和质量检验，但由于其坚固的结构，也特别适用于生产监控。111 型可根据规范艾式杯突试验的国家和国际标准进行针对所有铁金属和非铁金属的艾式杯突试验。使用适当的试具时，也可以按照 Olsen 规范进行试验，这些规范主要在美国使用。

Technical Descriptions

Norms

  1. ISO 8490
  2. EN 14-58
  3. EN 14-67
  4. EN ISO 20482
  5. JIS Z-2247

Technical specifications

Drawing Force

45 kN

Drawing Speed

150 mm/min

Drive

electro-hydraulic

Test 1

Erichsen cupping

Equipment

Microscope with Magnification Factor 10 and Battery Operated Illumination for accurate observation of the appearance of the crack
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 5 for strip more than 13 mm wide and 0.1 - 0.75 mm thick, consisting of ball punch 3 mm Ø, drawing die and sheet holder ring
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 11 for strip 30 - 55 mm wide and 0.1 - 1.0 mm thick, consisting of ball punch 8 mm Ø, drawing die and sheet holder ring
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 21 for strip 55 - 90 mm wide and 0.2 – 2,0 mm thick, consisting of ball punch 15 mm Ø, drawing die and sheet holder ring
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 27 for strip more than 90 mm wide and 0.1 - 2.0 mm thick, consisting of ball punch 20 mm Ø drawing die and sheet holder ring
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
Test Tool Set No. 40 for strip more than 90 mm wide and 2.0 - 3.0 mm thick, consisting of drawing die with 40 mm dia. bore, sheet holder ring and ball punch 20 mm dia
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
product image Erichsen Grain Scale in acc. with ASTM E 112 and Iron and Steel Test Sheet 1510 – 61 for establishing grain size on sheet and strip of all types on the basis of the Erichsen Cupping Test by comparison method, consisting of a plastic panel, suita...
Mehr lesen...
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
product image 2. Drawing force (range up to 10 kN) for automatic crack detection at sheet thicknesses <0,3 mm and 400 MPa tensile strength; recommended especially for aluminium. - cannot be retrofitted.
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
product image Analogue outputs Outputs for drawing stroke, drawing speed, drawing force, TTL-path signal, sync. signal, sheet holder force (only with simultaneous order of Art.-No. 26700332 -...
Mehr lesen...
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
product image Display of sheet holder force Cannot be retrofitted.
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product
product image USB camera and adapter ring
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product