Model 145/146
Universal sheet metal testing machine, Erichsen cupping and deep-draw testing and FLC, up to 1000 kN tensile force
Universal-Sheet Metal Testing Machine

146-100

Order number: 02620231
Non-Binding Inquiry
With the button below you can add products to a cart if you want us to do a quote for this product.
Note this product

Universal-Sheet Metal Testing Machine

146-100

The special feature of Model 146-100 is the increased drawing speed of the drawing punch which, in addition to the normal drawing speed range of 0 1200 mm/min can be adjusted, in an infinitely variable manner and independent of load, up to 3000 mm/min. This is achieved by using a separate oil circuit, fed by a pump with high volumetric displacement. Contrary to the high speed attachment based on a nitrogen accumulator, here a constant drawing speed behaviour is guaranteed over the total displacement of 150 mm. As to the technical design and the options available, including PC control and proportional valve technique, this machines are similar to Models 145.

Application: This Sheet Metal Testing Machine is not only ideal for the effortless, quick and accurate performance of all significant known deep drawing tests for ferrous and non-ferrous metals, it is also designed for a large number of additional technological investigations like the ERICHSEN Cupping Test and the ERICHSEN Deep Drawing Cup Test.

Relevant attributes are: Square Cup Test (40 x 40 mm or 70 x 70 mm), Bore Expanding Test (ISO 16630), Determination of the Forming Limit Curves (FLC), LDH Test Deep Drawing Tests with Blankholder Quick Release (for Earing Test), Deep Drawing Tests with Preselected Punch Stroke, Deep Drawing Test at High Temperatures up to 550 °C / 700 °C, Bulge Test in accordance with ISO 16808, ERICHSEN Cupping Test for Lacquer and Paint in accordance with DIN ISO 1520, Stamping Lacquer Test and Deep Drawing Cup Test on Coil Coatings.

Special Requirements on request.

The Testing Machine is driven electro-hydraulically. The test sequence is controlled automatically or manually as appropriate. A programme logic controller is used for the functions of the machine (optional computer controls). The drawing force and blankholder force as well as the drawing punch stroke are digitally displayed. The triple-acting hydraulic system in conjunction with the general design results in the following cost saving simplifications:

  • Blanking press in the test head
  • Hydraulic cup ejector
  • Fully-automatic test sequence

Norms

  1. DIN EN 1669
  2. ISO 11 531
  3. JIS Z 2249
  4. GB/T 15825
  5. ISO 12004
  6. ISO 16808

Technical specifications

Drawing Force

1000 kN

Drawing Speed

3000 mm/min

Drive

electro-hydraulic

Test 1

Deep Draw Test

Test 2

Hole Expansion

Test 3

FLC-Test

Test 4

Bulge-Test

Equipment